Description
● New solution for preheating: The hot-air preheated U-shaped heater has a long service life and reduces downtime caused by maintenance. Internal reinforced insulation and an optional external protection device effectively reduce heat loss, delivering up to 20% energy savings compared to conventional equipment.
● New solution for preheating:
The hot-air preheated U-shaped heater has a long service life and reduces downtime caused by maintenance. Internal reinforced insulation and an optional external protection device effectively reduce heat loss, delivering up to 20% energy savings compared to conventional equipment. A better working environment with lower machine body temperature.
● External spray flux unit, solving safety, cost, space and maintenance issues:
The external, independent spray control system ensures safety and cleanliness and is easy to use and maintain. The new titanium alloy heavy-duty claw conveyor with profiled guide rail design and a stainless steel strip supported on the guide rail provides long service life. The solder pot is made of special materials with an anti-corrosion coating on the surface. Imported precision nozzles deliver uniform atomization and high efficiency.
● Major improvements to the solder pot:
Quick-release nozzles cut maintenance time from 2 hours to a few minutes. A grid-type mesh reduces mesh clogging caused by solder dross and extends monthly maintenance to six months. An optional automatic solder feeding unit reduces the effect on wave height caused by a drop in the solder level.
| MODEL No. | 350 Series |
|---|---|
| AKP-350-M | |
| Wave Soldering Outer Dimensions (L*W*H) | 3945 × 1582 × 1735 mm |
| External Spray Flux Unit Outer Dimensions (L*W*H) | 1300×1350×1595 mm |
| Power Supply | 3P5W 380V AC 50/60Hz Option: 3P5W 220V AC 50/60Hz |
| Operating Power | ≤9KW |
| Heating Power | 30KW |
| Air | 0.5 MPa-0.8 MPa Air |
| Control Mode | PC and PLC |
| Spray Flow Rate | 10~100 ml/min |
| Exhaust Duct Diameter | Φ200 mm |
| Air Outlet Mode | Up-down Convection |
| Preheating Mode | Hot-Air Preheating / Infrared Preheating |
| Number of Preheating Zones | 3 Zones |
| Preheating Temperature | Room Temperature～230℃ |
| Preheating Temperature Control Mode | PID + SSR |
| Solder Pot Operating Mode | Mechanical Pump |
| Solder Pot Capacity | Lead-Free: Approx. 480 kg |
| Maximum Solder Pot Temperature | Maximum: 300°C |
| Wave Drive Power | 1/4 HP×2 |
| Warm-up Time | Approx. 140 minutes (Set Temperature: 265℃) |
| PCB Conveyor Speed | 300~1800 mm/min |
| PCB Width Range | Fifty to three hundred fifty millimeters |
| PCB Component Height | Top 120 mm, Bottom 25 mm |
| PCB Infeed Conveyor Height | 750±20 mm |
| Conveyor Guide Rail Incline | Factory: 5.5°±0.2° (4° to 7° adjustable) |
| Cooling Mode | Forced Air Cooling |
| Nitrogen Consumption | 15 m³/hour below 2000 ppm |
| Pressurized Nitrogen Supply | 0.5 to 0.8 MPa |
| Oxygen Content of Nitrogen Supply | ≤10 PPM |
| Oxygen Analyzer | Optional |
| The above specifications are subject to change without prior notice! |
Request a Quote
Pricing, lead time and integration details for AKP Series Wave Soldering Machine
Related Products
CFO Series High-Quality Lead-Free Hot-Air Convection Oven
High capacity, with a normal operating conveyor speed of up to 160 cm/min. Low energy consumption, low cost. Designed specifically for high-speed production and high-density PCBA technology; ● Strong temperature control, with a difference between set and actual temperature within 1.0 C, and unloading and loading temperature
→JNS Integrated Selective Soldering
● Spray Flux + Preheating + Soldering module, integrated design, flexible configuration and free expansion;● Point soldering module and group soldering module can be freely paired and combined;● The most efficient selective soldering module;● Sectional modular conveying structure.
→