Gate Conveyor (Normally Open Walkway)
EGC-300 gate conveyor providing a normally open walkway; the shuttle gate extends automatically to transfer PCBs across the 600 mm open passage.
Model: EGC-300
Equipment Name
Gate Conveyor (Normally Open Walkway)
Description
Designed to provide a normally open passage along the production line. When the downstream process is ready, the shuttle gate extends automatically to transfer the PCB across the open passage (600 mm). By pressing the Lock Reset Button, the open passage can be maintained while the operator walks through the gate.
Options
1. Automatic or Semi-Automatic Width Adjustment
2. 3-Color Tower Light with Audible Alarm
3. ESD Grounding Outlets
4. Safety Cover
5. Customized Walkway Length
6. Shuttle Gate Extended by Servo Motor
7. Safety Mat or Area Sensor for the Walkway
8. Adjustable Conveyor Speed via Speed Controller Inside the Control Box: 0~180 mm/sec (60 Hz)
9. CE Device (Model Name: EGC-300C)
Standard Features
1. Manual Width Adjustment (Hand Crank)
2. Touch Screen Operating Panel
3. Lock Reset Button for Walkway Use (Both Front and Rear)
4. 600 mm Walkway (Normally Open)
5. Shuttle Gate Extended by Cylinder
6. Safety Stop Walkway Sensors
7. Complies with SMEMA Specification 1.2.
| Model | EGC-300 | |
|---|---|---|
| Type | YL | XL |
| PCB Size (L x W, mm) | 50×50 ~ 430×350 | 50×50 ~ 530×460 |
| Machine Size (L x W x H, mm) | 670 (1270) x 650 x 910 | 670 (1270) x 750 x 910 |
| Weight (kg) | 160 | 180 |
Request a Quote
Pricing, lead time and integration details for Gate Conveyor (Normally Open Walkway)
Related Products
Link Conveyor
Model ECC-600 Link Conveyor. Designed to transport PCBs on edge belts and can be used as a linear buffer.
→Workstation
Model EWT-100. Equipment Name: Workstation. Description: Designed for working on/inspecting PCBs and transferring them to the next process. In inspection mode, the PCB stops in the middle of the conveyor. After the operator works on/inspects the PCBs, they press the foot pedal or the pass-through button. The PCB then
→Rotary Conveyor
Model ETC-180. Equipment name: Rotary Conveyor. Designed to change PCB flow 90 degrees clockwise or 90 degrees counterclockwise using a pneumatic cylinder. Where factory space is limited, this machine can be used to change the line flow.
→Inverter Turning Station
Model EIV-180. Equipment name: Inverter Turning Station. Designed to flip the top and bottom sides of the PCB 180 degrees using a pneumatic cylinder. This machine can be used for double-sided PCB processing. Pass-through mode and Automatic (Flip) mode can be selected on the touch screen.
→